cisco systems

 

New York Cabling Contractors - Wireless- WIFI- Backhaul Data Services

 

National Wireless Networks-National WIFI Installation-National WIMAX Installation-National Point to Point Wireless Installations- NationalPoint to Multipoint Wireless Installations

Live Support by Citricle

NEW NATIONAL 4 G WIRELESS ROLLOUT SERVICES

All ofNew York Cabling Contractors offices are part of a nationwide team of wireless network installation personnel can be mobilized anytime, anywhere to install your National Wireless Networks,National WIFI Installation,National WIMAX Installation,National Point to Point Wireless Installations, NationalPoint to Multipoint Wireless Installations.It is widely deployed in public areas know as hotspots (Internet cafes, campus, airports, hotels) and residential, multi-tenant buildings and enterprise where it’s used as an alternative to a wired LAN. WiFi brings the Internet to users with wireless laptops or PDAs and soon to cell phones regardless of their location.New York Cabling Contractors now can provide you with Mesh Networks that can seamlessly provide owners of hotels and resorts.

AllNew York Cabling Contractors offices are part of a nationwide team of network installation personnel can be mobilized anytime, anywhere. These experts are backed by seasoned teams of administrators, project managers, and technicians who are equipped to handle virtually any project. Established relationships with leading vendors also assure the best possible service and quality equipment is provided to our customers. These experts are backed by seasoned teams of administrators, project managers, and technicians who are equipped to handle virtually any project. Laptops and competition between Internet Service Providers (ISPs) have resulted in an increased focus on the use of RF technologies to provide data access services. Whether you desire to web surf from your laptop while enjoying a cup of espresso at the local coffee house or a business looking for ways to reduce Internet access fees, you are likely asking the question, "Can I do this wirelessly?" Most laptops today come equipped with wireless network connections. However, these wireless network connections are useless unless there is a wireless service available. Laptop computers now face the same problem that cell phones face: Where's the signal?

We offer a complete array of wireless-WIFI Product Solutions

AllNew York Cabling Contractors offices are part of a nationwide team of network installation personnel can be mobilized anytime, anywhere. These experts are backed by seasoned teams of administrators, project managers, and technicians who are equipped to handle virtually any project. Established relationships with leading vendors also assure the best possible service and quality equipment is provided to our customers. These experts are backed by seasoned teams of administrators, project managers, and technicians who are equipped to handle virtually any project. Laptops and competition between Internet Service Providers (ISPs) have resulted in an increased focus on the use of RF technologies to provide data access services. Whether you desire to web surf from your laptop while enjoying a cup of espresso at the local coffee house or a business looking for ways to reduce Internet access fees, you are likely asking the question, "Can I do this wirelessly?" Most laptops today come equipped with wireless network connections. However, these wireless network connections are useless unless there is a wireless service available. Laptop computers now face the same problem that cell phones face: Where's the signal?

Temporary WIFI Networks Metro-Rural Networks HospitalityEnterprise

Internet access for companies has traditionally been provided through special phone company circuits called T1s (or E1s). But local exchange companies (LECs) have traditionally held service monopolies in their markets and as a result T1/E1 service had no competition … if you wanted high speed Internet access, you had to pay the high monthly T1 lease fees. However, competition in the phone industry has been established and as a result, competing ISPs, CLECs, WISPs, etc. have been deploying their own networks (including wireless portions) from which to offer data networking services such as high speed access as well as plain old telephone service (POTS).

As you can see, there are several markets to be served by the wireless Internet Service Provider industry (WISP). No one product can serve all the myriad of applications and as a result there are now several wireless technologies to choose from. These technologies fall into two categories: standard technologies such as 802.11 (WiFi) and 802.16 (WiMax) and proprietary technologies. Each technology has its own advantages and disadvantages. But this is not the only way to distinguish wireless technologies. Other technology differences have to deal with whether the technology is point-to-point (PTP), point-to-multipoint (PMP), or something else (ex: mesh). Each of these faces differing regulatory requirements and serves different purposes.

Point to Point Technologies: Data Backhauls

PTP technologies are useful for serving as data backhauls that serve distribution systems (xDSL, cable modems, etc) and for connecting private data networks (ex: office buildings). PMP technologies are useful as distribution systems since more than one "end point" (customer premise) is served by a single "start point" (basestation).

Another key difference in wireless technologies is the geographic distance they are to serve. The term "hot spot" (referring to a small geographical area of coverage … for example, a coffee house) has entered into the standard terminology of the wireless data networking industry. But equipment useful for hot spot coverage will not accommodate the needs of the "last mile" application. A bit of a misnomer, the "last mile" has progressed to mean anything from the "last 50 meters/feet" to the "last 20 miles".

Point-to-point (PTP) RF data networking refers to the use of wireless (RF) technologies to create a data link between two … exactly two … locations. PTP wireless data networks tend to require high data throughput over long distances.

PTP is different from point-to-multipoint (PMP) in two key ways. First, PMP has more than two locations. Second, because there are more than two locations all sharing the same access media (the RF channel), the control and use of the RF channel becomes more complex.

Even within the "unlicensed" RF spectrum there are still regulatory requirements placed on the RF equipment. These regulatory requirements are typically different for PTP products than for PMP (sometimes very different). Most typically, these regulatory requirements deal with limiting the strength of the RF transmission. Just to make things more complicated, these restrictions are often placed on the RF equipment itself (TX power) and also on the combined affect of the RF equipment and the RF antenna (EIRP). PTP regulatory limits are typically higher than those for PMP products.

Wireless PTP data links typically do not require much in the way of network services. As a result, PTP devices typically operate as simple (Ethernet) bridges and leave services such as routing and traffic policing to the networks they are connecting. In a sense, a PTP wireless link becomes an invisible "cable" joining two data network devices. Without wireless technology, distances of over 100 meters typically must be served by wide area network (WAN) technologies such as T1/E1 and fiber. However, wireless data networking allows for local area network (LAN) technologies such as 10-BaseT to be used. These technologies are not only less expensive but they are more readily available as well … just about every computer now has an Ethernet network interface (NIC) port. This means that computers can be directly connected to each other using wireless PTP technology even if they are separated by many miles/kilometers.

Interconnect Services

  • Telephone Systems- We Service Most PBX & Key Systems
  • PBX Installation & Programming
  • Project Management
  • Ask Us About Our Quality -Guaranteed Refurbished Telephone Systems - Save More Than 80% Over A New Phone System

Telecommunications Cost Burden Audits and Cost Savings Analysis
Wide Area Voice Connectivity and Data Integration Solutions
PBX Systems Integration and Management
Voice Over Internet Technologies and Implementation
Call Center Design, Load Balancing and Software Based Management Solutions.
Unified Voice Messaging and Management Solutions
Wiring Infrastructure Analysis and Specifications
Local Voice Service Provisioning
Long Distance Voice Service Provisioning
Leased Line and Data Connectivity Service Provisioning

Northern CA (925) 944-0777

Southern CA (619) 573- 4164 or (213) 455- 0578

Tampa - St. Pete - Clearwater, Florida (855) 836-DATA or (727) 547- 2200

Tampa Bay Cabling & Network Installation Services

 

~ New York Cabling Contractors -Your 21st Century Systems Integrator ~

We can install and maintain any type of telephone system

New York Cabling Contractors Communications has been serving California, Nevada and Florida with a variety of telecommunications services since 1998. As a structured cabling contractor- systems integrator we a also a certified Cisco CCIE and value added partner of several manufacturers. New York Cabling Contractors can offer you the highest quality of services at extremely competitive rates.

We can also provide Cisco CCIE services from coast to coast.

Our Technical Expertise has provided our customers on both coasts with state of the art solutions for corporations, residential smart home builders-homeowners,commercial builders, developers, utilities, CLEC's ILEC's, and RBOC phone companies.

New York Cabling Contractorscan provide complete design build services for data centers, commercial bulidngs, utility and the residential "Smart Home" market. New York Cabling Contractors has a wide range of services includes professional fiber optic installation, structured cabling, network design and installation, data center/CO-location services, IT contract services, underground services including directional boring, telephone systems, and residential Smart Home Cabling, security, and technology.

New York Cabling Contractorsis a certified Leviton partner of cabling services for the residential and commercial markets where we can offer extended cabling warranties.

New York Cabling Contractorscan provide you with IP (voice/data over the Internet), video systems, network security including software and firewalls.

New York Cabling Contractorsis an agent for local phone and long distance services that can offer you competitive services through our partner companies.

tem, including Partner, Merlin, Nortel, Tosiba, NEC, Magix and Definity and more. We have a very fast turn around time thanks to our expert managers that oversee every Telephone System installation

We install telephone systems for your business and home office- and provide telephone services just about anywhere you need it. We also offer Service Contracts to maintain your system for you, that way you never have to worry if something goes wrong. Just give us a call and we will have your communication equipment installed as soon as possible.

Telephone Extenders

We also offer Telephone Extenders for PBX's. Companies that want to expand to another building or want to add telephone service to another building can be tied together using standard copper circuits or using a fiber optic cable, and a fiber optic multiplexer or "Telephone Extender"- see below: .Don't spend your company's IT budget on expensive new telephone systems. Call us for a complimentary quote how we can implement this cost saving technology.

 

Before you consider any technology from wireless, to DSL, T-1, or fiber optics, let New York Cabling Contractors's technical staff plan out the best and most cost effective solution to maximize your budget. Remember, your best performance or throughput is based on the "weakest link" of your network. Let us help you build a system that future proofs your network and maximizes performance from end to end.

New York Cabling Contractorsis a full service provider of structured cabling services, telecommunications infrastructure, security, and networking solutions for both commercial and residential applications.

"We are one of the leading companies offering the latest in the design and installation of Smart Home Technology systems"

Smart Home
Technologies includes an array of Internet and data ready "plug and play" cabling in the residential home. Just one cable connects your telephone, Internet, security, entertainment, computers, Smart Appliances, and more.

If you are a Building Contractor, call us today to find out how you can participate in this exciting and rewarding field.New York Cabling Contractors has offices located of both the east and west coasts.

Call us today for a no cost, no obligation quote for our services. You may fax or email your requests for additional information on our services.

New York Cabling Contractors Telephone Systems
New York Cabling Contractors Structured Cabling

New York Cabling Contractors E-Mail:

©2012 New York Cabling Contractors. All rights reserved